BACK

What makes Nature² the #1 natural alternative to chlorine (and bromine)?

Nature², with it's breakthrough technology , uses a uniquely patented mineral process that kills bacteria on contact,  faster than chlorine. And being powered by water flow, there's no electricity and no moving parts. It reduces the chemical consumption and the time you spend caring for your spa. Nature² water is brilliantly clear, soft and safe. Water purity you can see and feel !

Nature 2 is a water purification technology for   spas and hot tubs that gives the purest, clearest water imaginable. Nature 2 products use the same minerals found in nature to trap bacteria and algae. Because Nature 2 traps bacteria and algae, less harsh chemicals are needed to keep your spa water balanced.

By using Nature 2 , you reduce the level of harsh chemicals between 50% and 80% versus the harsh chemical levels you would need without Nature 2 .
It feels better.
  • Cuts chlorine & chemical use 50-80%
  • No more stinging eyes, dry skin and damaged hair
  • No more harsh chemical odors
  • Stops bleached and damaged bathing suits and towels
  • Stable water, even in hot weather and heavily used spas
  • Reduces chemical damage to pump and filter system
  • Compatible with other maintenance products

Nature 2 Advantages

  • Lasts four months
  • Makes spas easy to manage, halogen-free
  • Improves performance of ozone-equipped spas
  • Assures an odor-free spa
  • Significantly improves look & feel of water
  • Simplifies water balance and  it's unaffected by heat
  • 9 out of 10 spa users prefer Nature 2 over their old method
It works better.
  • Patented mineral process traps bacteria
  • Saves time & money
  • No electicity, no moving parts.
  • It's powered by water flow
  • Reduces work & chemical volume
  • Installs in minutes into most cartridge filters.

What Nature 2 does.

  • Less chlorine, less chemical use, fewer chemical hassles.
  • No red, burning eyes, irritated skin or discolored hair.
  • Less time necessary for pool maintenance.
  • Nature 2 will never create pool stains.
  • Easy to use.
  • Annual cost equal to or less than your current treatment.
  • A more refreshing, highly enjoyable swimming experience.

Nature² the Natural Spa Purifier for Cartridge Filters. Easy and Convenient!

Please see the Water Purifiers & Conditioners section of the Virtual Store for pricing and on-line ordering.

Our Customers say it best!

I just want a pleasant safe experience in the tub and with Nature² it just so happens to be simple too! Thanks Nature² for your product!

Susan Blakey

FAQ

Q: How do I know if Nature 2 is working?
A: The best test is improved water quality. You'll notice a big difference. Visual clarity and sparkle, even at low oxidizer levels show Nature 2 is working properly.
Q: After it's installed, will water maintenance change?
A: Yes, you will dramatically reduce chemicals use and maintenance time. Water balance will be easier, meaning there's simply less to do.
Q: Do I still need to use chlorine? Why?
A: Yes, you need to use a small amount of residual oxidizer. With Nature 2 you can reduce this amount by 50% to 80%. For superior results, we recommend low levels of free chlorine (0.5 ppm free chlorine minimum). You won't feel, smell or be affected by chlorine at this level.
Q: Are low levels of minerals safer in a spa?
A: Yes, water treated by Nature 2 actually meets and exceeds EPA drinking water standards for bacteria, silver and copper. Is Nature 2 compatible with other products? Nature 2 can be used with every type of chemical treatment program available except bromine and bromide based chemicals, biguanide products (Baquacil* or SoftSwim**) and copper-based algaecides.
Q: Is Nature 2 a filter?
A: No. A filter removes particles and debris, while Nature 2 purifies water by trapping bacteria and algae, which are too small to be caught by a filter. You still need a filter when using a Nature 2 system.
Q: Is Nature 2 an "ionizer"?
A: No. Ionizers electrically discharge copper (or metal alloy) ions into water. Ionizers can deliver ions via an electrical current (electrodes) or salt dissolution. When do I replace the cartridge? Each model comes with a reminder to tell you when to replace it.
Q: What affects cartridge life?
A: Nothing — including filter run time, heavy use, hot weather, and water temperature.
Q: How do I dispose of used cartridges?
A: The minerals inside Nature 2 are natural, so it is safe for disposal with other household trash.
Q: How often do I need to super-oxidize (shock)?
A: Because of the efficiency of Nature 2 , super-oxidation is needed much less often. You only need to super-oxidize if the water becomes dull or cloudy. The start-up of each new cartridge requires an initial shock with chlorine.

Installation
CONSULT YOUR SPA OWNER'S MANUAL BEFORE OPENING YOUR FILTER .

Step 1


Connect the support stems together and press onto main body to create a single device.

Step 2
Slide the entire device into the core of your existing spa filter cartridge. See examples below.

Open Top
Simply slide unit in from the top. Position near the top half of the cartridge. (Support stems may be cut to position the cartridge correctly.)

Open Top with Stand Pipe
Some spa filter systems are configured with a standpipe running the length of the filter core. Simply slide unit in from the top. Position near the top half of the cartridge for easy retrieval.

Closed Top
Simply slide unit in from the bottom. Position unit to rest on shelf inside filter core.

Note: When installed, the Spa Purifier must be at least 1" (2.5 cm) above the bottom of the filter to prevent blocking water flow.

Specifications:
Capacity: for spas up to 1,000 gallons
Run time: minimum 4 hours daily
Flow rate: works with all spa flow rates
Installation: Drops into the core of most spa filters, works with suction-side and pressure-side filters
Our Customers say it best!

My husband and I have had a spa for 10 years-we would never be with out one. However, about a year ago he started having awful blotches all over his body. We tried everything to find out what it was-laundry soap, body soap, bromine or chlorine. It never went away or got better until we got Nature 2. Within a couple of weeks of changing to Nature 2 all signs of the skin irritation were gone and have never come back.
And it is so maintenance easy!! The water is always sparkling clean and there is no unpleasant odor. We love the product and will continue to use it forever.
Thanks a million!!

C. Colyer
Amelia, OH

Spa Maintenance

Ingredients
• Nature² Purifier
• Non-chlorine oxidizer (such as "Renew " ) *
• Nature 2 Spa Test Stripss ** or Test Kits (pH, total alkalinity)
• pH and total alkalinity adjusting chemicals
• Sodium dichlor (chlorine granules) for Purifier Startup and occasional shock

When: What to do:
Purifier Start Up Drain and refill your spa. Balance water per dealer guidelines. Add 1 teaspoon of Sodium dichlor to spa per 250 gallons (approx. 1000 litres). (Note: 1 teaspoon = 1/4 ounce = 7 grams.)
Every Day Run spa according to recommendation supplied to you by the manufacturer of your spa
Before Each Use Add 1 tablespoon of potassium peroxymonosulfate ( "Renew " ) to spa per 250 gallons (approx. 1000 litres)
(Note: 1 tablespoon = 1 tablet = 3/4 ounce = 21 grams.) A convenient way to insure proper MPS level is to use a Nature² Spa Test Strip . If the Nature 2 Spa Test Strip indicates a low level of MPS, add 1 tablespoon of MPS to spa per 250 gallons and retest.
Once A Week Add 3 tablespoons of potassium peroxymonosulfate ( "Renew " ) to spa per 250 gallons (approx. 1000 litres). Check and adjust pH and total alkalinity. A convenient way to check pH and total, alkalinity levels is to use a Nature 2 Spa Test Strip.
Every 4 Months Drain and refill your spa.
Replace Nature 2 purifier, repeat purifier start-up.
As Needed If water looks hazy, shock treat with 1 teaspoon of sodium dichlor per 250 gallons (approx. 1000 litres)
NOTES:
  • The Nature 2 Spa Purifier is not to be used with products containing bromine, sodium bromide or biguanides. If these products are being used, BE SURE TO DRAIN AND REFILL SPA WITH FRESH WATER BEFORE BEGINNING.
  • As an alternative to potassium monopersulfate( "Renew" ), dichlor may be substituted (1 teaspoon dichlor = 3 tablespoons potassium peroxymonosulfate).
  • The use of an efficient ozone generator with Nature2 may reduce the need for supplemental chemical treatments.
  • Potassium peroxymonosulfate may cause a lowering of the pH and total alkalinity of your spa water as well as an increase in TDS.
    Please monitor pH and total alkalinity at least once per week and adjust accordingly.

Important
The Nature 2 Spa Purifier is not to be used with products containing bromine, sodium bromide or biguanides. If these products are being used, be sure to drain and refill spa with fresh water prior to starting with Nature 2 .

Note:

  • As an alternative to potassium monopersulfate, dichlor may be substituted:
    1 teaspoon dichlor = 3 tablespoons potassium peroxymonosulfate.
  • The use of an efficient ozone generator with Nature 2 may reduce the need for supplemental chemical treatments.

* Potassium peroxymonosulfate may cause an increase od TDS, and a lowering of the pH and total alkalinity of your spa water. Please monitor pH and total alkalinity at least once per week and adjust accordingly.

 

 

 

 


BACK